- ページ 8

ホブ Zanussi ZGH62414WAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZGH62414WA 21 ページ。
Zanussi ZGH62414WA にも：ユーザーマニュアル (21 ページ)

ページを印刷する

WARNING! Make sure the flame does

not go out when you quickly turn the

knob from the maximum position to the

minimum position.

ELECTRICAL CONNECTION

•

Make sure that the rated voltage and type of

power on the rating plate agree with the voltage

and the power of the local power supply.

•

This appliance is supplied with a mains cable. It

has to be supplied with a correct plug which

can hold the load that the rating plate rates.

Make sure that you install the plug in a correct

socket.

•

Always use a correctly installed shockproof

socket.

•

Make sure that there is an access to the mains

plug after the installation.

•

Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

•

There is a risk of fire when the appliance is in

connection with an extension cable, an adapter

or a multiple connection. Make sure that the

ground connection agrees with the standards

and regulations.

•

Do not let the power cable to heat up to a

temperature higher than 90° C.

CONNECTION CABLE

To replace the connection cable use only the

special cable or its equivalent. The cable type is:

H03V2V2-F T90.

Make sure that the cable section is applicable to

the voltage and the working temperature. The

yellow / green earth wire must be approximately 2

cm longer than the brown (or black) phase wire.

1. Connect the green and yellow (earth) wire to

the terminal which is marked with the letter 'E',

or the earth symbol

yellow.

2. Connect the blue (neutral) wire to the terminal

which is marked with the letter 'N' or coloured

blue.

, or coloured green and

3. Connect the brown (live) wire to the terminal

which is marked with the letter 'L'. It must

always be connected to the network phase.

ASSEMBLY

min. 100 mm

min. 55 mm

30 mm

min. 650 mm

550 mm