- ページ 7

ホブ Zanussi ZGH66424XSのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZGH66424XS 49 ページ。
Zanussi ZGH66424XS にも：ユーザーマニュアル (33 ページ), ユーザーマニュアル (21 ページ), ユーザーマニュアル (21 ページ)

ページを印刷する

5. Reassemble the gasket and the knob.

WARNING! Make sure the flame does

not go out when you quickly turn the

knob from the maximum position to the

minimum position.

ELECTRICAL CONNECTION

•

Make sure that the rated voltage and type of

power on the rating plate agree with the voltage

and the power of the local power supply.

•

This appliance is supplied with a mains cable

and a plug.

•

Always use a correctly installed shockproof

socket.

•

Make sure that there is an access to the mains

plug after the installation.

•

Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

•

There is a risk of fire when the appliance is in

connection with an extension cable, an adapter

or a multiple connection. Make sure that the

ground connection agrees with the standards

and regulations.

•

Do not let the power cable to heat up to a

temperature higher than 90° C.

Make sure that you connect the blue

neutral cable to the terminal with a

letter "N" on it. Connect the brown (or

black) phase cable to the terminal

which has a letter "L". Keep the phase

cable connected at all times.

CONNECTION CABLE

To replace the connection cable use only the

special cable or its equivalent. The cable type is:

H05V2V2-F T90.

Make sure that the cable section is applicable to

the voltage and the working temperature. The

yellow / green earth wire must be approximately 2

cm longer than the brown (or black) phase wire.

ASSEMBLY

min.

100 mm

min.

55 mm

30 mm

480 mm

min.

650 mm

560 mm