- ページ 10
ホブ Zanussi ZITN643KのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZITN643K 21 ページ。
Zanussi ZITN643K にも： ユーザーマニュアル (20 ページ)
ページを印刷する
HOB²HOOD
It is an advanced automatic function which
connects the hob to a special hood. Both the hob
and the hood have an infrared signal communicator.
Speed of the fan is defined automatically on basis
of mode setting and temperature of the hottest
cookware on the hob. You can also operate the fan
from the hob manually.
For most of the hoods the remote
system is originally deactivated.
Activate it before you use the function.
For more information refer to hood
user manual.
Operating the function automatically
To operate the function automatically set the
automatic mode to H1 – H6. The hob is originally
set to H5. The hood reacts whenever you operate
the hob. The hob recognizes temperature of the
cookware automatically and adjusts the speed of
the fan.
Automatic modes
Automatic
light
Mode
Off
H0
Mode
On
H1
Mode
On
3)
H2
Mode
On
H3
Mode
On
H4
10
1)
2)
Boiling
Frying
Off
Off
Off
Off
Fan
Fan
speed 1
speed 1
Off
Fan
speed 1
Fan
Fan
speed 1
speed 1
Automatic
light
Mode
On
H5
Mode
On
H6
1) The hob detects the boiling process and acti-
vates fan speed in accordance with automatic
mode.
2) The hob detects the frying process and activates
fan speed in accordance with automatic mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch
for 3 seconds. The display comes on
and goes off.
3. Touch
for 3 seconds.
4. Touch
a few times until
5. Touch
of the Timer to select an automatic
mode.
To operate the hood directly on the
hood panel deactivate the automatic
mode of the function.
When you finish cooking and
deactivate the hob, the hood fan may
still operate for a certain period of
time. After that time the system
deactivates the fan automatically and
prevents you from accidental activation
of the fan for the next 30 seconds.
Operating the fan speed manually
You can also operate the function manually. To do
that touch
when the hob is active. This
deactivates automatic operation of the function and
allows you to change the fan speed manually.
When you press
you raise the fan speed by one.
When you reach an intensive level and press
again you will set fan speed to 0 which deactivates
the hood fan. To start the fan again with fan speed
1 touch
.
To activate automatic operation of the
function, deactivate the hob and
activate it again.
1)
2)
Boiling
Frying
Fan
Fan
speed 1
speed 2
Fan
Fan
speed 2
speed 3
comes on.