- ページ 11
ホブ Zanussi ZITN643KのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZITN643K 20 ページ。
Zanussi ZITN643K にも： ユーザーマニュアル (21 ページ)
ページを印刷する
To activate the function: touch
comes on for 4 seconds. The Timer stays on.
To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob,
you also deactivate this function.
5.9 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the hob
with
. Do not set any heat setting. Touch
for 4 seconds.
the hob with
.
To deactivate the function: activate the hob
with
. Do not set any heat setting. Touch
for 4 seconds.
the hob with
.
To override the function for only one
cooking time: activate the hob with
comes on. Touch
heat setting in 10 seconds. You can
operate the hob. When you deactivate the
hob with
the function operates again.
5.10 Power management
• Cooking zones are grouped according to
the location and number of the phases in
the hob. See the illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds
3700 W.
• The function decreases the power to the
other cooking zones connected to the
same phase.
• The heat setting display of the reduced
zones alternates between the chosen
heat setting and the reduced heat setting.
After some time the heat setting display of
.
. The
comes on. Deactivate
comes on. Deactivate
.
for 4 seconds. Set the
the reduced zones stays on the reduced
heat setting.
5.11 Hob²Hood
It is an advanced automatic function which
connects the hob to a special hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is defined
automatically on basis of mode setting and
temperature of the hottest cookware on the
hob. You can also operate the fan from the
hob manually.
For most of the hoods the
remote system is originally
deactivated. Activate it before
you use the function. For more
information refer to hood user
manual.
Operating the function automatically
To operate the function automatically set the
automatic mode to H1 – H6. The hob is
originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes temperature of the cookware
automatically and adjusts the speed of the
fan.
Automatic modes
Automat‐
ic light
Mode H0
Off
Mode H1
On
Mode
On
3)
H2
Boiling 1)
Frying 2)
Off
Off
Off
Off
Fan speed
Fan speed
1
1
ENGLISH
11