- ページ 21

ホブ Zanussi ZKH 863 LXのPDF 据付・取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi ZKH 863 LX 41 ページ。 Ceramic glass hob

2.While the control lamp is flashing rapidly, use the + or - timersetting

sensor panels to set the desired period of time for this cooking zone up

until the point where it automatically switches itself off (e.g. 15 minutes).

The safety cut-out function will be activated after several minutes

The control lamp will now flash more slowly and the remaining cooking time

will be shown in the display as it elapses. If the safety cut-out function has

been set for more than one cooking zone, the time displayed will be that for

the cooking zone with the shortest period of cooking time remaining. The

control lamps for the other cooking zones for which the safety cut-out func-

tion has been set will illuminate. To display the remaining cooking time for

any of these cooking zones, it must be selected using the timer sensor

panel

, and the corresponding control lamp will then flash rapidly.

To reset the remaining cooking time the desired cooking zone must be se-

lected using the timer sensor panel

then flash more rapidly. The settings are reset using the + or - timer set-

ting sensor panels.

After the set period of cooking time has elapsed the cooking zone automat-

ically switches itself off, an acoustic signal sounds for two minutes and the

timer display flashes 00.

3.To switch off the signal, touch the timer sensor panel

To make the setting more quickly, touch any of the + or - timer setting

sensor panels until the desired value is reached.

If the - timer setting sensor panel is actuated first, the time setting will be-

gin at 99 minutes, and if the + timer setting sensor panel is actuated first,

the time setting will begin at 1 minute.

. The corresponding control lamp will