- ページ 14

ホブ Zanussi ZKL 850 LXのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi ZKL 850 LX 18 ページ。 Ceramic built-in hob
Zanussi ZKL 850 LX にも：取扱説明書 (18 ページ)

Installing into a kit

chen worksurface

Make a note of the serial number on the ap-

pliance rating plate prior to installation. This

number will be required in the case of requests

for service and is no longer accessible after in-

stallation, as it is on the original rating plate on

the underside of the appliance.

1. Cut out the worktop according to the dimensions

quoted (Fig.1). (Saw exactly along the line.)

2. Fix according to Fig. 2

Position A must be used for screwing–on the catch

springs (Fig.1).

Important: The screw must be driven into the worktop

as illustrated.

Avoid overtightening. Do not use electric or pneu-

matic screwdrivers unless they have, adjustable

slipping clutches (set to 1–1.1 Nm).

3. Check the sealing for proper fit and full contact.

4. Place the ceramic hob in the cut–out.

fig.1

fig.2

Ö Ö Ö Ö Ö Ö Ö Ö

1 Catch spring

2 Screws

3 Worktop

4 Frame

5 Sealing tape

6 Glass ceramic plate