- ページ 12

冷凍庫 Zanussi ZFT11100XAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZFT11100XA 16 ページ。 Zanussi freezer user manual
Zanussi ZFT11100XA にも: ユーザーマニュアル (16 ページ)

Zanussi ZFT11100XA ユーザーマニュアル
A
• A - green and yellow: Earth
• C - brown: Live
• D - blue: Neutral
As the colours of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either with the

Technical information

Technical data

Height
Width
Depth
Rising time
Voltage
Frequency
The technical information are situated in the
rating plate, on the external or internal side of
the appliance and in the energy label.

ENVIRONMENT CONCERNS

Recycle the materials with the symbol
the packaging in applicable containers to
12
B
C
D
E
mm
mm
mm
Hours
Volts
Hz
. Put
letter "E" or by the earth symbol
coloured green and yellow.
2. Connect the wire coloured blue to the
terminal either marked with the letter "N" or
coloured black.
3. Connect the wire coloured brown to the
terminal either marked with the "L" or
coloured red.
4. Check that no cut, or stray strands of wire is
present and the cord clamp (E) is secure
over the outer sheath.
Make sure the electricity supply voltage is
the same as that indicated on the appliance
rating plate.
5. Switch on the appliance.
The appliance is supplied with a 13 amp fuse
(B). In the event of having to change the fuse in
the plug supplied, a 13 amp ASTA approved
(BS 1362) fuse must be used.
WARNING!
A cut off plug inserted into a 13 amp
socket is a serious safety (shock)
hazard. Ensure that it is disposed of
safely.
850
550
612
22
230 - 240
50
recycle it. Help protect the environment and
human health and to recycle waste of electrical
or
www.zanussi.com