- ページ 20

冷凍庫 Zanussi ZFT11114WAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZFT11114WA 48 ページ。

ページを印刷する

Problem

If the advice does not lead to the

desired result, call the nearest

Authorized Service Centre.

Closing the door

1. Clean the door gaskets.

Installation

WARNING!

Refer to Safety chapters.

Positioning

This appliance can be installed in a dry, well

ventilated indoor where the ambient

temperature corresponds to the climate class

indicated on the rating plate of the appliance:

Climate

Ambient temperature

class

+10°C to + 32°C

+16°C to + 32°C

+16°C to + 38°C

+16°C to + 43°C

Possible cause

The door is not closed correctly.

The food products' temperature

is too high.

Many food products are stored at

the same time.

The thickness of the frost is

greater than 4-5 mm.

The door has been opened often. Open the door only if necessary.

There is no cold air circulation in

the appliance.

2. If necessary, adjust the door. Refer to

3. If necessary, replace the defective door

Levelling

When placing the appliance ensure that it

stands level. This can be achieved by two

adjustable feet at the bottom in front.

Refer to "Closing the door".

Let the food products tempera-

ture decrease to room tempera-

ture before storage.

Store less food products at the

same time.

Defrost the appliance.

Make sure that there is cold air

circulation in the appliance.

"Installation".

gaskets. Contact the Authorised Service

Centre.

Some functional problems might

occur for some types of models

when operating outside of that

range. The correct operation can

only be guaranteed within the

specified temperature range. If you

have any doubts regarding where to

install the appliance, please turn to

the vendor, to our customer service

or to the nearest Authorised Service

Centre.

Solution