- ページ 8
冷凍庫 Zanussi ZNME32EM1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZNME32EM1 21 ページ。
ページを印刷する
WARNING! A cut off plug inserted
into a 13 amp socket is a serious
safety (shock) hazard. Ensure that it is
disposed of safely.
LEVELLING
When placing the appliance make sure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
REAR SPACERS
In the bag with the documentation, there are two
spacers which must be fitted as shown in the
figure.
If you position the appliance against a wall in a
freestanding installation, install the rear spacers in
order to guarantee the maximum possible distance.
OPERATION
CONTROL PANEL
C
D
A
SWITCHING ON AND OFF
To switch on the appliance, insert the plug into the
wall socket.
When the appliance is switched on for
the first time, the interior light may turn
on after a one-minute delay due to
opening tests.
To switch off the appliance, unplug it.
TEMPERATURE REGULATION
Recommended set temperature is:
•
+4°C for the fridge.
•
-18°C for the freezer.
The temperature range may vary between -16°C
and -24°C or 1°C and 8°C.
8
E
F
G
B
DOOR REVERSIBILITY
Reversing the door swing is not possible.
A. Freezer compartment control button
B. Fridge compartment control button
C. Freezer compartment temperature indicator
D. Economy indicator
E. Super Freeze indicator
F. Alarm indicator
G. Fridge compartment temperature indicator
The Economy mode is activated
automatically when the temperature of
the freezer compartment is set to
-18°C. This mode ensures good food
preservation with minimal energy
consumption.
To set the temperature of the appliance, press the
fridge or freezer compartment control button
repeatedly until you reach the desired temperature
of each compartment.
Choose the setting keeping in mind that the
temperature inside the appliance depends on:
•
room temperature,
•
frequency of opening the door,
•
quantity of food stored,
•
appliance location.