- ページ 14

冷凍庫 Zanussi ZUC 053WのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi ZUC 053W 16 ページ。 Zanussi freezer instruction book
Zanussi ZUC 053W にも：仕様 (8 ページ), 取扱説明書 (16 ページ)

ページを印刷する

Ventilation Requirements

The appliance must have adequate ventilation to

ensure correct operation.

Diagram shows the ventilation requirements when

installed:

A* Under a worktop, or cupboard.

* The clearance space of 10 cm above the appliance

may be reduced to 5 cm providing a clearance

space 2.5 cm is left on either side of the appliance.

B When freestanding

Door Reversal

If required the opening direction of the door can be

changed as follows:

To reverse the hinge assembly proceed as follows:

Disconnect the appliance from the electricity

supply.

Remove the top hinge cover.

Unscrew the 2 retaining screws, and remove the

hinge from the appliance.

Take the door off.

Unscrew the lower hinge retaining screws, and

remove the hinge according to the diagram.

Fit the lower hinge on the opposite side.

Fix the door onto the lower hinge pin.

To fit top door hinge, remove the plastic blanking

plugs carefully, and refit them in the holes left by the

hinge retaining screws.

Refit the top hinge using the 2 retaining screws,

taking care that the edge of the door is parallel with

side of the cabinet.

Replace the hinge cover.

Remove screw covers (if fitted) and handle retaining

screws. Remove blanking plugs on the opposite

side using a punch.

Relocate the handle to the opposite side and refit

retaining screws (covers if fitted), and push the

plastic plugs supplied with the instruction book into

the holes where the handle was previously fitted.