- ページ 5
冷凍庫 Zanussi ZV 180 RのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi ZV 180 R 7 ページ。
Zanussi ZV 180 R にも： 取扱説明書 (11 ページ)
ページを印刷する
USE
Cleaning the interior
Before using the appliance for the first time, wash
the interior and all internal accessories with luke-
warm water and some neutral soap so as to remove
the typical smell of a brand-new product, then dry
thoroughly.
Do not use detergents or abrasive
powders, as these will damage the finish.
This freezer has been marked with the
foods, the conservation of frozen foods and the production of ice-cubes.
The control panel
N S
A
A. N/S knob
B.Thermostat knob
C. Function indicator light
D. Quick-freezing indicator light
E. Temperature alarm light
Operation
Insert the plug into the wall socket. The pilot light will
light up, indicating that the appliance is in operation.
To stop the appliance, turn the thermostat knob to
position « 0 ».
Temperature regulation
The temperature is automatically regulated and can
be increased to achieve a higher temperature
(warmer) by rotating the thermostat knob towards
minimum or reduced (colder) by rotating the knob
towards maximum. However, the exact setting should
be chosen keeping in mina that the temperature
inside the refrigerator depends on:
room temperature;
how often the door is opened;
the quantity of food stored;
location of appliance.
A medium setting is generally the most suitable.
To stop operation, simply turn the thermostat knob to
position « 0 ».
24
symbol, which means that it is suited to the freezing of fresh
0
6
5
4
2
3
B
C
D
E
Fast freezing
To start fast-freezing food, turn the fast freeze knob
to "S" (A). Pilot light (D) will come on.
Warning light
Warning light (E) lights up when the temperature
inside the freezer compartment has increased to a
value which might endanger the long-term storage of
food in the compartment. When the appliance is
switched on for the first time or when food is placed
in the compartment for freezing, it is normal for this
light to remain on until the temperature has reached
the level required for correct storage.
Freezing food
The 4-star compartment
is suitable for long
term storage of commercially frozen food, and for
freezing fresh food.
Rear spacers
The plastic bag containing all relevant
documentation also contains two rear wall spacers to
be fitted into special slots on the back of the
appliance. Fit the spacers into the slots, taking care
to ensure that the arrow (A) is positioned as shown
in the figure. Next, turn them through 45° (arrow in
vertical position) until they lock into place.
Door reversal
Unplug the appliance before all operations.
To reverse the door, proceed as follows:
1. dismantle the lower hinge (1), and the support
foot (2);
2. unscrew the left front foot (3) and reposition on
the opposite side;
3. slide the door out from pin (G),unscrew the pin
and reposition on the opposite side;
4. unscrew the two screws which mask the holes for
fixing the hinge from the left front side;
5. reassemble the door;
6. reassemble the lower hinge (1), and the support
foot (2) on the opposite side;
7. dismantle the handle and reassemble it on the
opposite side.Cover the holes left open with the
plugs contained in the documentation pack.
Warning:
After having reversed the opening direction of
the doors check that all the screws are properly
tightened and that the magnetic seal adheres to
the cabinet. If the ambient temperature is cold (i.e.
in W¦nter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the
gasket or accelerate this process by heating up the
part involved with a normal hairdrier.
A
45°
PR60
G
3
1
2
D715 PIED/M
D162/1
29