ページを印刷するIf this appliance – equipped with magnetic door seals
– replaces an older appliance featuring a spring lock
(mechanical latch) on the door or lid, please ensure
that this lock is made completely unusable before
«throwing out» the old appliance. This will prevent it
from becoming a death-trap for a child.
Location
Place the appliance as far away as possible from
sources of heat, e.g. radiators, heaters, direct sunlight,
etc. The best results are achieved with a room
temperature of between +18 C and +38 C.
Make sure that there is nothing hindering air
circulation at the back, bottom or top of the appliance.
To achieve the best performance, the top of the
appliance – if set under a wall cabinet – should be at
least 100 mm away from the base of the cabinet
(Figure 1 - A). However, the appliance should ideally
not be installed underneath wall cabinets (as shown in
Figure 1 - B).
It can be positioned with its sides set tight against
adjacent furniture as long as air is able to circulate
freely behind and above it.
One or more adjustable feet mounted on the base of
the appliance make it possible to set it perfectly level.
Rear spacers
The plastic bag containing all relevant documentation
also contains two rear wall spacers to be fitted into
special slots on the back of the appliance. Fit the
spacers into the slots, taking care to ensure that the
arrow (A) is positioned as shown in Figure 2. Next,
turn them through 45 (arrow in vertical position)
until they lock into place.
24
INSTALLATION
A
NP006
45°
D060
Fig. 1
B
Fig. 2
A
GB