- ページ 15

換気フード Zanussi ZHC 935のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi ZHC 935 20 ページ。 Cooker hood
Zanussi ZHC 935 にも：取扱説明書 (19 ページ), 取扱説明書 (20 ページ)

Fitting the Chimney Stack

The chimney consists of two sections. The upper

chimney measures 215mm and the lower chimney

(with the holes for recirculation on either side)

measures 740mm.

Upper Chimney Stack

Expand the sides of the upper chimney

stack item 2.1 and place the chimney over

the two brackets 7.2.1 ensuring they are

well seated.

Secure the chimney stack to the

brackets 7.2.1 using the four self

tapping screws 12c - 2.0x6.5mm.

Lower Chimney Stack

Expand the of the lower chimney stack

item 2.2 and place the chimney over the

upper chimney stack item 2.1 and the

canopy item 1.

Secure the chimney stack to the canopy

using the two screws item 12c -

2.9x6.5mm.

After the chimney has been secured into

position, insert the two plastic

recirculation grilles item 8a (right-hand)

and 8b (left-hand) in the apertures on

each side of the chimney. The grilles are

marked with two arrows and should be

fitted with one arrow pointing upwards and

the other toward the front.

When the hood is used in the recirculation

mode ensure that the grilles are properly

secured to the recirculation extension

spigot 14.1.

INSTALLING THE COOKER HOOD

2.1

2.2

7.2.1

12c