- ページ 11

換気フード Zanussi ZHI60111GのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZHI60111G 17 ページ。

Please ensure that when the appliance is

installed it is easily accessible to an

engineer in the event of a breakdown.

All installations must comply with the local

authorities requirements for the discharge of

exhaust air.

Incorrect installation may affect the safety of this

cooker hood.

Before installation check the wall to which the

cooker hood is to be fitted for electric cables,

water pipes or gas.

If it is necessary to fix the hood to a hollow

construction plaster or partition board

structure then it should be sufficiently

reinforced to be quite rigid in the area of the

cooker hood mounting brackets, and the

appropriate rawl plugs used for this type of

fixing (not supplied).

Ducting

The ducting must be fire retardant 100mm (4ins)

in diameter and the length should be no

more than:

3 metres with one 90° bend

2 metres with two 90° bends

Bends of more than 90° will reduce the

efficiency of the hood and reduce the airflow.

INSTALLING THE COOKER HOOD