ページを印刷する
ZHT900X
新增頁面
電源/延遲關機 清洗功能
1. Power / Delay-Off
(1) Turn On or Turn Off the hood.
(2) First time turn on the hood, hood will at Low fan speed and light on.
(3) Hood will remember the last speed and light level it was turned off at.
(4) With the fans on press Power/Delay-Off button to turn off the entire
hood (fan and light).
(5) With the fans on press and hold Power/Delay-Off button for three
seconds to activate Delay Off function. The fan will change to Low
speed and the 5 minutes delay off timer will start. The fan speed
and light level can be adjusted during 5 minutes Delay Off. The
LED indicator under this button will illuminate and slowly blink in
accordance with the time remaining until the fan and light automatically
turn off.
(6) Pressing Power/Delay-Off button while Delay-Off function is enabled
will turn the hood off and cancel the Delay-Off function.
2. Auto Clean
(1) Pressing Auto Clean button to activate the auto clean function. The
LED indicator under Auto Clean button will illuminate. Pressing
Auto Clean button or Power button while auto clean function is
enabled will cancel the auto clean function.
(2) Auto Clean button is invalid while Delay Off function.
(3) Auto Clean button is invalid while fans on.
(4) After 30 hours of fans usage, the indicator of Auto Clean will begin
to slowly blink indicating it is time to clean the hood. Press and hold
Auto Clean button for three seconds to cancel reminder.
3. Fan Speed
(1) With the fan off press Fan Speed button to turn on the fans at the
last fan speed it was turned off, it will not impact the light.
(2) With the fan on press Fan Speed button to switch the fan speed.
Low Mid High Low ...
(3) LED indicators for fan speed
Low Speed
Operation Instructure
風速功能
Mid Speed
電熱功能
High Speed
10
照明功能