- ページ 19
調理器 Zanussi 7332543286072のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi 7332543286072 24 ページ。
Zanussi 7332543286072 にも： ユーザーマニュアル (24 ページ), ユーザーマニュアル (20 ページ), ユーザーマニュアル (20 ページ), ユーザーマニュアル (24 ページ)
ページを印刷する
2. You can find the hole on the left side at the
back of the appliance. Lift the front of the
appliance and put it in the middle of the
space between the cupboards. If the space
between the bench cupboards is larger
than the width of the appliance, you must
adjust the side measurement to centre the
appliance.
If you changed the dimensions of the
cooker, you must align the non-tip
device correctly.
CAUTION!
If the space between the bench
cupboards is larger than the width of
the appliance, you must adjust the
side measurement to the centre of
the appliance.
Electrical installation
WARNING!
The manufacturer is not responsible
if you do not follow the safety
precautions from Safety chapters.
Energy efficiency
Product information for hob according to EU 66/2014
Model identifica-
ZCV55001WA
tion
Type of hob
Hob inside Freestanding Cooker
www.zanussi.com
This appliance is supplied without a main plug
or a main cable.
80-85
mm
317-322
mm
Applicable types of cables for different phases:
WARNING!
Before you connect the mains cable
to the terminal, measure the voltage
between phases in the house
network. Then, refer to the
connection label at the back of the
appliance to use the correct
electrical installation. This order of
steps prevents from installation
errors and damage to the electrical
components of the appliance.
Phase
1
3 without neutral
WARNING!
The power cable must not touch the
part of the appliance shaded in the
illustration.
Min. size cable
not applicable
4x1.0 mm²
19