- ページ 7

調理器 Zanussi 7332543286072のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi 7332543286072 24 ページ。
Zanussi 7332543286072 にも：ユーザーマニュアル (24 ページ), ユーザーマニュアル (24 ページ), ユーザーマニュアル (20 ページ), ユーザーマニュアル (20 ページ)

ページを印刷する

Before first use

WARNING!

Refer to Safety chapters.

Initial Cleaning

Remove all accessories from the appliance.

Refer to "Care and cleaning"

chapter.

Clean the appliance before first use.

Put the accessories back to their initial position.

Preheating

Preheat the empty appliance to burn off the

remaining grease.

1. Set the function

temperature.

2. Let the appliance operate for 1 hour.

3. Set the function

temperature. The maximum temperature for

this function is 210 °C.

4. Let the appliance operate for 15 minutes.

Accessories can become hotter than usual. The

appliance can emit an odour and smoke. This is

normal. Make sure that the airflow in the room is

sufficient.

Installing the steam outlet cover

Applies only for white hob lid. For selected

models only.

Hob - Daily use

WARNING!

Refer to Safety chapters.

Heat setting

Symbols

Off position

1 - 6

Heat settings

www.zanussi.com

and the maximum

Function

The hot air emitted from the steam outlet can

cause discolouration of the white hob lid. This

area becomes yellow. To prevent this install the

steam outlet cover.

1. Place the hooks of the cover under the front

edge of the steam outlet holes.

2. Push down the back edge to lock the cover.

Use the residual heat to decrease

energy consumption. Deactivate the

cooking zone approximately 5 - 10

minutes before the cooking process

is completed.

Turn the knob to a necessary heat setting.

The hob control indicator comes on.

To complete the cooking process, turn the knob

to the off position.

If all cooking zones are deactivated, the hob

control indicator goes out.