- ページ 20

調理器 Zanussi GAS AND ELECTROGAS COOKERSのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi GAS AND ELECTROGAS COOKERS 28 ページ。 Gas cookers

POSITIONING

The appliance belongs to the class "X".

It has been designed to be placed close to furniture

able to withstand more than 75 C added to the room

temperature and not exceeding the height of the

working level (CEI 61- 80).

The appliance is provided with adjustable small feet

placed in the back and front corners od the base.

By adjusting the small feet (fig. 23) it is possible to

change the height of the appliance so as to ensure a

better levelling with othor surfaces and a uniform

distribution of the liquids contained in pans anci pota.

The models that come with crystal lids are equipped

with specially balanced springs.

These are inserted in the hinges at the back of the

appliance to allow the lid to be closed smoothly and

easily.

You can use a screwdriver to adjust the closure of the

lid. The necessary force for opening/closing the lid can

be increased by turning the adjusting screw 2 or 3

times as shown in Fig. 24.

Gas connection must be carried out according to the

rules UNI - CIG 7129 - 7131.

Fig. 23

The manufacturing company release the unit, once

tested, adjusted for the kind of gas stated on the rating

plate located on the back of the range, next to

connection pipe. Be sure that you are going to connect

the unit to the same kind of gas written on the plate.

Otherwise, follow all the instructions of the paragraph

"REGULATION TO DIFFERENT KINDS OF GAS".

For best efficiency and lowest consumption, be sure

that manifold gas pressure respects the values in the

table of "Burners characteristics".

If gas pressure is different (or variable) from the proper

one, a suitable pressure regulator should be installed

on feeding pipe.

The use of pressure regulators for liquid gas (LPG) is

allowed provided they are modelled in conformity with

the regulations UNI-CIG 7432.

Fig. 24