- ページ 24

調理器 Zanussi ZCG5000のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZCG5000 40 ページ。 Gas cooker
Zanussi ZCG5000 にも：取扱説明書 (48 ページ)

Cleaning the hob

Clean the hotplate top using a mild abrasive.

Take care not to damage the spark

electrodes.

If the spark electrodes are

damaged the burners will not light.

You can remove the pan supports, burner

caps and burner crowns to clean them.

Again take care not to damage the spark

electrodes.

Clean the burner crowns and pan supports

by soaking them in very hot soapy water.

Aluminium based saucepans can leave

shiny metal marks on the pan supports. You

can remove any stubborn stains by scouring

with a soap impregnated steel wool pad. If

you look after the burner crowns and pan

supports in this way they will stay reasonably

clean. However the surface will dull with

time. After cleaning the appliance parts, dry

them thoroughly before you put them back.

When replacing hotplate

burner parts

Crown to body. (Do not try to force the

crown on to the body).

Make sure that the hole in the crown is

over the electrode.

location pegs sit in the slots in the body.

When the crown is in this position let it

fall freely on to the body. Check that the

crown can be moved slightly from side

to side.

Cap to crown. Place cap centrally on

the top of crown (enamel side up).

Move sideways and front to back to

check the cap is properly fitted.

Check for ignition. If a burner will not

light then you need to check the crown

and cap positions.

Check that the