- ページ 15
調理器 Zanussi ZCG51011WAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZCG51011WA 48 ページ。
ページを印刷する
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem
The flame extinguishes imme-
diately after ignition.
The flame ring is uneven.
The burners do not work.
The appliance makes noises.
The flame colour is orange or
yellow.
Steam and condensation settle
on the food and in the cavity of
the oven.
The oven does not heat up.
It takes too long to cook the
dishes or they cook too quick-
ly.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
www.zanussi.com
Possible cause
Thermocouple is not heated up
sufficiently.
Burner crown is blocked with
food residues.
There is no gas supply.
You left the dish in the oven for
too long.
The necessary settings are not
set.
The temperature is too low or
too high.
We recommend that you write the data here:
After lightning the flame, keep
the spark generator activated
for equal or less than 10 sec-
onds
Make sure that the injector is
not blocked and the burner
crown is clean.
Check the gas connection.
Some metal parts of the appli-
ance expand and contract
when they heat up or cool
down. The noises are normal.
The flame can look orange or
yellow in some areas of the
burner. This is normal.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
Make sure that the settings are
correct.
Adjust the temperature if nec-
essary. Follow the advice in
the user manual.
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
15