ページを印刷するDimension
E
450
F
less than 400
Levelling of the appliance
Use small feet on the bottom of appliance to set
the appliance top surface level with other
surfaces.
The stability chain
CAUTION!
Install the stability chain to prevent
the appliance from tilting. The
stability chain only works when the
appliance is put in a correct area.
Gas burners
BURNER
Auxiliary
Semi-rapid
Rapid
Grill
Top Oven
Main Oven
Gas Connection
Use a flexible pipe in compliance with the
regulation in force. Make sure they do not come
in touch with mobile parts and are not
squeezed.
www.zanussi.com
mm
NORMAL POWER
kW
1
1.9
3
2.7
1.7
1.7
1. Measure down 180 mm from the appliance
top surface, then measure right 30 mm.
2. Mark the position of the wall and this gives
anchor point for the stability chain.
Other technical data
WARNING!
These instructions are only valid in
the countries whose symbols appear
on this booklet's cover.
Gas category:
Gas supply:
Voltage:
Frequency:
Natural Gas
INJECTOR MARK 1/100 mm
70
96
119
122
95
95
180 mm
30 mm
I2H
G20 (2H) 20 mbar
220-240 V
50/60 Hz
Btu/h
3412
6483
10236
9212
5804
5804
21