- ページ 19

調理器 Zanussi ZCV66000WAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZCV66000WA 20 ページ。
Zanussi ZCV66000WA にも：ユーザーマニュアル (24 ページ)

4. Check that the anti-tilt protection (A) fits

minimum 20 mm into the hole in the rear

wall of the appliance (B) when you push the

appliance.

Electrical installation

WARNING!

The manufacturer is not responsible

if you do not follow the safety

precautions from Safety chapters.

This appliance is supplied without a main plug

or a main cable.

Covering terminal board

ENVIRONMENTAL CONCERNS

Recycle the materials with the symbol

the packaging in applicable containers to

recycle it. Help protect the environment and

human health and to recycle waste of electrical

and electronic appliances. Do not dispose

appliances marked with the symbol

household waste. Return the product to your

local recycling facility or contact your municipal

office.

www.zanussi.com

• The recommended cross-section area is six

50 mm

• When you refit the mains terminal cover,

77 mm

• Make sure that the cover is securely

Terminal board

Make sure that the links are fitted as shown.

. Put

with the

square millimetres (6 mm²).

make sure that the lower tabs are located

inside the bottom edge of the aperture,

before you fix the two screws into the top

edge of the mains terminal cover.

fastened.

To open the cover of terminal board

obey the procedure in opposite

sequence.

Do not remove blanking plates.