ページを印刷する
TROUBLE SHOOTING GUIDE
Transmitter has no transmission:
Mic sensitivity is too low, adjust the Mic Sensitivity Knob to increase sensitivity.
Battery has run down or AC adapter improperly connected, recharge battery
using charger stand or check connection.
Transmitter always on:
The Mic Sensitivity Knob is turned fully counter clockwise, turn the Mic sensitivity
Knob clockwise to set the transmitter to become voice activated.
Out-of-range alarm always on:
Digital code setting in transmitter and receiver are different, set the same digital
code for transmitter and receiver.
Transmitter's battery has run down, recharge battery using charger stand or use
AC adapter.
Transmitter and receiver operate on different channels, make sure they are on
same channel.
Out-of-range alarm sometimes on:
Interference from other devices operating on same channel, remove the
electrical appliance or re-locate the transmitter far away from the source of
interference.
All icon show up in the LCD:
Battery has run down, charge up the battery in the charger stand.
Nothing show up in the LCD:
Battery has completely run down, charge up the battery for at least 12 hours
before use.
Many static noises and interference:
Transmitter is located near other electrical appliances, switch to another channel.
7