- ページ 6

ベビーモニター Alecto DBX-82のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Alecto DBX-82 17 ページ。

ページを印刷する

ADDITIONAL FEATURES AND SETTINGS

CHANGE SEND / RECEIVE CHANNEL:

Baby unit:

1. Push 1x on the

2. Push on the button

3. Push on the button

Parent unit:

1. Push 1x on the button

2. Push on the button

3. Push on the button

CHANGE SUB CHANNELS (CTCSS):

Baby unit:

1. Push 2x on the button

the letters [Ct] behind.

2. Use the buttons

enable or disable this feature by setting sub-channel to 00.

3. Push on the

Parent unit:

1. Push 2x on the

2. Use the buttons

enable or disable this feature by setting sub channel to 00.

3. Push the

PTT

ENSURE THAT THE PARENT UNIT

AND BABY UNIT ARE ON THE

SAME CHANNEL AND THAT THE

SAME SUB-CHANNELS ARE

SELECTED.

ALSO SEE PAGE 10, CHAPTER

ENTITLED 'BABY MULTIPLE

UNITS'.

button, after the channel indicator light [CH] comes on

to select a new channel (1-8)

to set the new channel

; the channel display will start flashing

to select a new channel (1-8)

to set the new channel

PTT

to select or disable the sub-channel (1-38) or to

button to set the selected sub-channel.

button; the sub-channel indicator will begin to flash.

to select or disable the sub-channel (1-38) or to

button to set the selected sub-channel

; the sub channels will show up in large with

Explanation of the CTCSS code:

Continuous Tone Controlled

Squelch System is the tone code

that is sent when transmitting. This

code is not an audible tone.

Only when the tone code from the

baby unit corresponds to the tone

code from the parent unit, will the

parent unit display the signal. This

prevents the baby monitor from

interference from other devices

that may communicate on the

same channel.