- ページ 11
ウェザーステーション Alecto WS-4900のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Alecto WS-4900 20 ページ。 Weather station with wireless outdoor sensor
4.5 Barometer (air pressure):
If this screen isn't visible, first briefly press the button
1
2
3
4
6. Indicates whether the air pressure is shown in hPa (hectoPascal), in inHg (inch mercury pressure) or
mmHg (millimeter mercury pressure) (see also * add 6)
* add 5: An absolute air pressure indicates the air pressure that is present regardless of the altitude at which
you measure the air pressure. A relative air pressure is the air pressure that is compensated for the altitude
at which you measure the air pressure. For a correct weather forecast you need the relative air pressure.
You may set the desired unit as follows:
1. Press and hold the
2. Use / to select the desired unit: REL for relative, ABS for absolute
3. Briefly press the
Refer to the chapter 7 for adjusting the relative air pressure display in case you're using the weather station
somewhere a lot higher than sea level.
add 6: In the Benelux one uses the hectopascal notation. Before, the air pressure was sometimes also
expressed in bars. 1 mbar equals 1 hPa. Briefly press the
4.6 Rain:
If this screen isn't visible, first briefly press the
1
2
3
4
5
7. Indication of whether the amount of rainfall is displayed in "in" (inch) or in "mm" (millimetre). (see also
* add 7)
* add 3: No indication = : the rainfall during the past hour (this is updated every 6 minutes and shows the
amount of rainfall during the past 60 minutes).
DAILY = : rainfall of today, calculated from midnight.
WEEKLY = : rainfall from the beginning of the week (Monday)
MONTHLY = : rainfall in this month
Briefly press the
* add 7: You may set the desired unit as follows:
1. press and hold the
2. use / to select the desired unit
3. briefly press the
1. 'barometer' indication
5
2. Actual air pressure
3. This shows the air pressure trend over the last 24 hours
6
4. Air pressure per hour over the last 24 hours
5. Indicates whether the relative or absolute air pressure is shown (see
also * add 5)
button for 2 seconds
button (if the air pressure now starts flashing, press the
1. 'rain' indication
6
2. Illuminates when the max. rain alert is set
7
3. Indicates over which period the displayed rainfall amount is mea-
sured (see also * add 3) .
4. Rainfall per day over the last 5 days
5. Rainfall trend over the last 5 days
6. Today's rainfall amount
button to switch between these indications.
button for 2 seconds
buttons
button to switch between these notations.
button
11
button again)