ビデオゲームアクセサリー AFS SIO2SDのPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。AFS SIO2SD 2 ページ。

SIO2SD is a device that allows you to load games/applications into 8-bit Atari computers via SIO

interface from SD/MMC cards.

Device abilities:

• Works with SD/MMC (FAT12,FAT16 and FAT32 formats - Warning !!! Software up to version

2.0 had a bug in FAT12 code - FAT12 is typically used by Windows XP for 16MB cards)

• Handles ATR (rw), XFD (ro) and COM/XEX (ro) file types

• 16x2 LCD display allows to "walk" catalog tree and choose files to load

• Handles SIO with turbo (allows to set speed index from 1 to 16, default is 6 (69kb/s), in

versions 1.x speed index was always 10 (51kb/s))

• All densities with 128B and 256B sectors, including 16MB disks

• Handles drives d1 to d8 (up to version 1.2 only d1 to d4 drives were available)

• Can be configured using ATARI (it's possible to load configuration tool directly from MCU

flash memory, so no SD card is needed)

You have to format (FAT) SD card using computer, in root directory create ATARI folder. In this

folder you can place folders and files. This is the start folder for SIO2SD. It's a good idea to use folders

with up to about 100 files than one big folder with many, many files. On the first use of a new

formatted card SIO2SD will create SIO2SD.CFG file in root directory, where configuration will be

stored (files to disks mapping). To perform firmware upgrade, just put SIO2SD.BIN (28k version) into

the root directory, then insert card with this file and press proper key combination. Note: the directory

named ATARI must be present on the card or else SIO2SD won't recognize the card and won't perform

the upgrade.

On PCB there are five keys placed like this:

K1: next Atari drive (D1,D2,..)

•

K2: next file/folder

•

K3: parent directory (cd ..)

•

K4: go to folder/map file to current Atari drive

•

SHIFT+K2: firmware upgrade

•

SHIFT+K4: turn off current Atari drive ("eject disk")

•

SIO2SD

SHIFT

Quick Guide

USAGE

Atari Fan Store

http://afs.atari.org