- ページ 2
インバーター ACOPOWER HY-CB-PS100+50WのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ACOPOWER HY-CB-PS100+50W 2 ページ。 Portable solar generator
6.Storage and Downtime Maintenance:
Having your generator connected to a power source, like a solar panel or wall outlet, between
adventures or while in storage keeps its battery healthy and topped off. This prolongs battery life and
will ensure your generator is charged and ready to go all day, every day.
If you can not keep your generator plugged into a power source during storage, fully-charge your
generator every 3 months and store it in a cool, dry place.
Failure to maintain your generator by following these steps can result in battery damage which
will void the product warranty.
Specifications
154Wh (3.7V/41600mAh)
Capacity:
172Wh (3.7V/46400mAh)
Lithium-ion cell
Battery Type:
Input:
DC 19V/2A by Adapter or Solar Panel
AC Output Power:
Rated Output Power: 200W max
100-120V~/60Hz ( for Generator1 version)
AC Output:
220-240V~/50Hz ( for Generator2 version)
USB-1:5V/2.4A Max
DC Output:
USB-2:5V/2.4A Max
USB-3:QC3.0
Inverter Waveform:
Pure Sine Wave
1.8Kg/63oz
Net Weight:
Dimension:
232.5x90x90mm / 9.1x3.5x3.5in
12 months
Warranty:
Low Voltage Protection
Over Voltage Protection
Over Power Protection
Protection:
Over current Protection
Over Temperature Protection
Short Circuit Protection
LED Indicator
There are four LED indicators to display the battery level status of the portable solar generator.
When being recharged, the LED indicators will light up based on the current battery level:
Charging: (
:LED flashes;
: LED is off;
Battery Status Indicator
Battery Level
0% - 25%
26% - 50%
51% - 75%
76% - 99%
100%
When devices are connected, the LED indicators will light up as follows:
:LED flashes
(
: LED is on;
Battery Status Indicator
Battery Level
100% - 75%
75% - 50%
50% - 25%
25% - 10%
≤10%
Low Battery: When the battery is lower than 10%, the 1st LED will be blinking. Output for the USB port
●
and AC output will automatically stop working until battery is empty.
AC Power LED indicator: When it is green, AC output is on, when it is red,AC output is faulty,need to
●
reboost
Power Button
button again to show the remaining battery level before charging another device.
again before charging another device.
3.If the AC output fails,double click the Power Button to turn on the AC output again.
b) Continue to long press 3s to turn on SOS mode;
c ) Continue to long press 3s to turn on strobe mode;
d)
Frequently Asked Questions
Does a pure-sine wave inverter mean?
1.
When it comes to power, you might have heard the letters DC and AC thrown around. DC stands for Direct
Current, and is the only type of power that can be stored in a battery. AC stands for Alternating Current,
which is the type of power your devices use when they're plugged into the wall. An inverter is required to
change DC output to AC output and requires a small amount of power for the change. You can see this by
turning on the AC port.
A pure-sine wave inverter, like the one found in your generator, produces an output that is exactly the
same as supplied by an AC wall plug in your house.
Although integrating a pure-sine wave inverter takes more components, it produces power output that
makes it compatible with almost all AC electric devices you use in your house.
So in the end, the pure-sine wave inverter allows your generator to safely power almost everything under
watts in your house that you would normally plug into the wall.
: LED is on)
)
2.How do I know if my device will work with the generator?
First, you'll need to determine the amount of power your device requires. This may require some research
on your end, a good online search or examining the user guide for your device should suffice. To be
compatible with the generator , you should use devices that require less than 200W.
Second, you will need to check the capacity for the individual output ports. For example, the AC port is
monitored by an inverter that allows for 200W of continuous power. This means if your device is a pulling
more than 200W for an extended period of time, the generator's inverter will very hot dangerous shut off.
Once you know your device is compatible, you will want to determine how long you will be able to power
your gear from the generator.
3.How to charge my iPhone?
option
Connect iPhone with generator USB output socket by cable(If generator does not automatic run, just
short press power button to switch on the generator)
4.How to supply power for my TV/Laptop/Drone?
Connect your TV to AC output Socket, then double click the button to switch on the generator, when the
AC power LED is green color, it starts to supply power for your TV.
Troubleshooting
If your devices are not recharging from your generator, follow these steps:
1.Ensure the AC Output Port has been turned on. The green LED light should be lit up.
2.Check the Battery Power LED Indicator. If it is at 25% or below, recharge your generator(if you charge
from AC).
3.Verify your device is suitable for use with the generator:
a.All of the generator output ports have their own max power capacity. Check the generator's Tech
Specs to ensure your device is compatible.
b.Some devices with rechargeable batteries, like laptops and tablets, may pull more watts when in use.
In these cases, power down your device and recharge it.
If you are still experiencing trouble with your generator, please contact our Customer Solutions Center by
email.
Education
BATTERIES 101:
adventures. From the versatile and lightweight Lithium Ion, we've compiled some helpful tips to keep your
batteries working their best.
1.Batteries need exercise
The best thing for any battery is to use it. Don't leave a charged battery sitting around, unloved and
unused for long periods of time.
2.Read the manual.
Yeah, it might be a long read, but the manual is the best place to find the dos and don'ts for the battery in
your specific device. Reading your manual will ensure you're taking steps to keep your batteries happy
and healthy.
SOLAR 101:
We makes it easy to recharge your gear from the sun – we didn't invent solar power, we
perfected it. Some things to keep in mind when recharging your gear with solar power:
1.Solar panels don't store power from the sun, they collect it.
We teach you to COLLECT – STORE – USE, which is the best way to utilize solar power to recharge
your gear.
2.Not all solar charge times are created equal
Most solar panel manufacturers calculate their recharge times with the following equation: Device Watt
Hours/Solar Panel Watts = Solar Recharge Times.For example: So theoretically, a 13 watt solar panel
would recharge a 50 watt-hour recharger in 3.84 hours (50/13 = 3.84) – and this is the number you could
find in marketing material for a solar panel. However, in order to standardize results across all
manufacturers, these tests are completed in laboratory settings. The truth is, on a good, sunny day, you'll
receive about 50-75% of your solar panel's rated wattage, and this is how the engineers at our calculate
the solar recharge times you see on our packaging.
3.Solar works, even in overcast conditions.
Solar panels utilize IR, UV, and visible rays from the sun that can penetrate through clouds. Although the
efficiency of the solar panel will decrease in cloudy conditions, you'll still be collecting valuable power
from the sun.
4.Keep away from shade and windows.
Although you should seek out the shade on sunny days, your solar panels will collect more power when
fully exposed to the sunlight. Windows also have a habit of decreasing efficiency. So keep those panels
outside and in the bright sunlight.
5.Proper alignment works wonders.
Keeping your solar panel angled toward the sun can dramatically increase solar efficiency. Set it up and
let Mother Nature do the rest.
Warranty
Our products are covered by 12 month limited warranty from the date of its original purchase.
If any problems occur, please contact our support team.
Caution
• Keep away from heat sources and liquids.
• Please do not dismantle this product.
• Fully charge the power bank at least once every 3 months.
1.When generator is very hot,stop to use until it is cool to normal temperature.It
may happen when you load devices over its rated output power.
2.When inside temperature is over 60℃,the unit will automatic shut down to
protect and keep safety.After the temperature is lower than 45℃, the power
gererator will be back and ready for use.
Add:4120 Valley Blvd. Walnut, CA 91789.USA
Tel: 1.626.575.8822
Our utilizes the latest and greatest in battery technology to accompany you on all life's
Email:[email protected]