- ページ 9

サンダー Clarke 3400400のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 3400400 17 ページ。 Hand held drywall sander

PREPARATION AND USE

FITTING A SANDING PAD

1. Ensure the sander is switched off

and the plug is removed from the

socket.

2. Remove the sanding disc.

3. Place the allen key in the

hexagon hole in the centre of the

sanding pad and rotate

clockwise to remove disc

4. Place replacement sanding pad and tighten allen key anticlockwise.

1. Ensure the sander is switched off

and the plug is removed from the

socket.

2. Select the sanding disc to be

used.

• This MUST be the correct 4 hole

190mm diameter disc with

hook and loop backing.

3. Line up the holes in the disc with those on the sanding pad.

• This is necessary for dust extraction purposes.

4. Press the disc firmly onto the pad to secure it using the hook & loop

backing.

FITTING THE AUXILIARY HANDLE

1. Screw handle into the side of the

sander, as shown.

2. There are equivalent screw holes

on both sides of the sander,

depending on personal grip

preferences.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]