- ページ 5

サンダー Clarke CBK200CのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke CBK200C 8 ページ。 Polishing kit

ADDING COMPOUND TO THE POLISHING WHEEL

1. Turn on the bench grinder.

2. When the wheel has reached

maximum speed, apply the

polishing compound to the wheel

(at the 4 o'clock position) as

shown.

3. Turn off the bench grinder and

allow it to come to a stop.

4. The polishing wheel is now ready

for use.

USING THE POLISHING KIT

1. Turn on the bench grinder.

2. When the wheel has reached

maximum speed, apply the item

you want to polish to the wheel

(at the 4 o'clock position) as

shown.

3. Remove the polishing wheel and

replace it with the buffing wheel.

4. Repeat step 2 to buff the item to a

fine finish.

REPLACEMENT POLISHING COMPOUND

Replacement polishing compound is available from you local CLARKE dealer.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]