- ページ 4

サンダー Clarke CP180のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke CP180 13 ページ。 Sander/polisher

Electrical Connections

Connect the mains lead to a standard 230V (50Hz) electrical supply through an approved

13 Amp BS1363 plug or a suitably fused isolator switch.

WARNING: This appliance is DOUBLE INSULATED

IMPORTANT: The wires in the mains lead are coloured in accordance with

the following code:

As the colours of the flexible cord of this appliance may not correspond with the coloured

markings identifying terminals in your plug proceed as follows:

•

Connect BROWN coloured cord to plug terminal marked with a letter L or

•

Connect BLUE coloured cord to plug terminal marked with a letter N or coloured

IMPORTANT: If this appliance is fitted with a plug which is moulded on to

the electric cable (i.e. non- re-wireable) please note:

1. The plug must be thrown away if it is cut from the

electric cable. There is a danger of electric shock if

it is subsequently inserted into a socket outlet.

2. Never use the plug without the fuse cover fitted.

3. Should you wish to replace a detachable fuse

carrier, ensure that the correct replacement is used

(as indicated by marking or colour code).

4. Replacement fuse covers can be obtained from

your local dealer or most electrical stockists.

5. The fuse in the plug must be replaced with one of the same rating (13 amps) and this

replacement must be approved to BS1362.

IMPORTANT: If in any doubt, do not attempt any electrical repair yourself.

Consult a qualified technician.

If a cable extension is needed, it is essential to comply with the following data.

Voltage

230v

Blue

Neutral

Brown

Live

coloured RED.

BLACK.

IMPORTANT:

Extension length

Up to 20m

From 20 to 50m

-4-

Cable section

2.5mm

4mm