- ページ 3

サンダー Clarke EZ-8 07059AのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Clarke EZ-8 07059A 10 ページ。

Motor

1-Remove two screws (39) securing the belt guard (5)

2-Remove two nuts (50) on the front side of the motor mounting plate

3-Turn machine over and remove the dust plate (44) to expose the motor mounting nuts

3-Remove two nuts (27) from the back side of the motor mounting plate (Fig. 37)

Assembly Hints

Motor plate shims (47) can be added or removed to obtain proper belt tension

Belt Removal and Replacement

1-Remove two screws (39) securing the belt guard (5)

2-If belts are not being reused cut them off

3-If belts will be reused rotate the motor pulley (6) by hand while pushing the fan belt (8) off of the fan

pulley (14) with a screw driver or similar object and repeat with the drum belt (9) (Fig. 38)

Reassembly

1-Install the drum belt (9) on the motor pulley (6) and turn the motor pulley by hand to roll the belt onto to

drum pulley (29) and repeat with the fan belt (8) (Fig. 39)

2-Reinstall the belt guard

56043147

Page 3