- ページ 7

配管製品 Aleko B6 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aleko B6 Series 16 ページ。 Outdoor barrel sauna with/without canopy

4. Steel Strip Assembly

(1)

Each steel strip consists of one long and one short steel strip.

(2)Use the fat bolts and nuts to connect one of the end of the long

belt and the short belt together

Figure of steel strip Assemblying

(3)Then assemble the connected bands on sauna room Use pencil and measuring tape

to make marks of the distance on the sauna room

bands lock, and we suggest in the position similar as clock at 4 O'clock or 8 O'clock direction.

(4)After assembling all steel bands,

adjustment later

. (Shown in Figure 8)

Figure 8

You can refer to assembly position of

tighten them up, but not too tight with space left for

Steel strip + M12 X180

Position at 4 O'clock or 8

O'clock

The steel strip lock should be in symmetry

(namely at 4 O'clock or 8 O'clock)

- 7-

+M12x180

Steel strip

！

The two stainless steel

bands in front and back must

completely cover screw holes

for front and back wall assembly.

！

The bands in the middle should

be equally divided by 1-5 strips and

are freely assembled by customers:

we suggest customers bundle up at the

spacing of 500-1000mm.