- ページ 3

遊び場機器 Aleko BSW05のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Aleko BSW05 4 ページ。 Double swing and glider playset

Step 7. Insert 1 Plain Bottom Leg into both Left and Right-Hand Top Legs, and place

an F2 bolt through the leg junction (Fig. 4).

Step 8. Attach flat side of Side Stay Bar to the protruding thread side of the F2 bolt, and

apply washer and round-ended cap nut to secure Leg and Side bar assembly.

Step 9. Repeat process for both Swing and Glider sides of swing set.

Fig. 5

Step 1. Slide Glider bracket over Top Bar on Glider side and align to the 2 horizontal

holes (Fig. 5).

Step 2. Attach Glider Bracket to Top Bar using 2 G1 fasteners (Fig. 6).

Step 3. Insert 1 G8 Plastic Spacer into the holes on either side of the Glider Handle

Tubes.

Step 4. Attach curved upper bar portion of Glider Handle Tubes to holes on bottom

corner of the Glider Bracket using 1 G2 fastener for each side.

M6 BOLT 35mm (x4)

Step 5. Insert tapered segment of Glider Legs into exposed open side of Glider Handle

Tubes, use 2 G6 fasteners on either side to attach (Fig. 7).

THICK PLASTIC SPACER (x4)

Fig. 6

• Assemble seats (Part 11) and attach to seat tubes (Part 10) before tightening

bolts (G4)

Fig. 7

M6 BOLT 38mm (x8)

M8 BOLT 83mm (x2)

M6 BOLT 40mm (x2)

Fig. 8