- ページ 3

サンダー Clarke X-PRO CAT165のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke X-PRO CAT165 17 ページ。 10mm air belt sander

GENERAL SAFETY RULES

CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN

PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.

1. Keep the work area clean and tidy.

2. Dress appropriately - Do not wear loose clothing or jewellery. Tie long hair

out of the way.

3. Keep children and visitors away - Do not let children handle the tool.

4. Do not operate the tool where there are flammable liquids or gases.

USE OF AIR POWERED TOOLS

1. Stay alert and use common sense - do not operate the sander when you

are tired or under the influence of alcohol, drugs or medication.

2. Always wear eye protectors when using the sander- Eye protection must

provide protection from flying particles from the front and the side.

3. Always wear ear protectors when using the sander.

4. Do not overreach - Keep proper footing and balance at all times.

5. Never use any type of bottled gas as a source of power.

6. Do not connect the air supply hose with your finger on the trigger.

7. Do not exceed the maximum pressure for the tool 90 psi / 6.2 bar.

8. Check hoses for leaks or worn condition before use and ensure that all

connections are secure.

9. Keep the air supply hose away from heat, oil and sharp edges.

10. Do not use the tool for any other purpose than that described in this

manual.

11. Do not fit the tool to any stand or clamping device that may damage it.

12. Do not carry out any alterations or modifications to the sander.

13. Always disconnect from the air supply when:

• Performing any maintenance

• The tool is not in use.

• The sander will be left unattended.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]