- ページ 2

水ポンプ Clarke 7160042のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 7160042 13 ページ。 12&24v diesel fuel transfer pumps

INTRODUCTION

Thank you for purchasing this CLARKE Pump.

The DFT12 & 24 pumps are designed only for use with diesel, paraffin and light

fuel oils and can be connected to vehicle batteries of either 12 or 24 Volts

respectively. They must not be used with water, petroleum fuels or alcohol, nor

if small solids are known to be in suspension.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

SPECIFICATIONS

Fluid Classification / Fluids to be used

Rated Max. Head (suction height)

Rated Max. Flowrate

Max. Operating Temperature

Max Liquid temperature

Duty Cycle

Weight

Inlet & Outlet Hose Diameter

Motor Voltage

IP Rating

Reserve polarity protection

Sound pressure level

Suction/Delivery Hose Lengths

Supply Cable lengths

Please note that the details and specifications contained herein, are correct

at the time of going to print. However, CLARKE International reserve the right

to change specifications at any time without prior notice.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Clean (light fuel oil, paraffin & diesel)

6 m

40 litres/min (diesel)

10-70

30 mins on/ 30 mins off

9.0 kg (complete kit)

3/4" BSP nominal

12V DC (DFT12A) or 24VDC (DFT24A)

IP54

Yes

65 db LpA

2 m