- ページ 5

ツール Alemite 586-AのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Alemite 586-A 12 ページ。 Cordless grease gun (battery charger included)
Alemite 586-A にも：取扱説明書 (16 ページ)

ページを印刷する

Intended use

These model guns are designed to dispense

petroleum-based greases for general

lubrication applications.

WARNING

Read all safety warnings and

all instructions. Failure to

follow the warnings and

instructions listed below may

result in electric shock, fire

and/or serious injury.

Safety instructions

General power tool safety

warnings

Save all warnings and instructions for future

reference. The term "power tool" in all of the

warnings listed below refers to your mains

operated (corded) power tool or battery

operated (cordless) power tool.

1 Work area safety

1.1 Keep work area clean and well lit.

Cluttered or dark areas invite

accidents.

1.2 Do not operate power tools in explo-

sive atmospheres, such as in the

presence of flammable liquids, gases

or dust. Power tools create sparks

which may ignite the dust or fumes.

1.3 Keep children and bystanders away

while operating a power tool.

Distractions can cause you to lose

control.

2 Electrical safety

2.1 Power tool plugs must match the

outlet. Never modify the plug in any

way. Do not use any adapter plugs

with earthed (grounded) power tools.

Unmodified plugs and matching

outlets will reduce risk of electric shock.

2.2 Avoid body contact with earthed or

grounded surfaces such as pipes,

radiators, ranges and refrigerators.

There is an increased risk of electric

shock if your body is earthed or

grounded.

2.3 Do not expose power tools to rain or

wet conditions. Water entering a

power tool will increase the risk of

electric shock.

2.4 Do not abuse the cord. Never use the cord

for carrying, pulling or

unplugging the power tool. Keep cord

away from heat, oil, sharp edges or

moving parts. Damaged or entangled

cords increase the risk of electric

shock.

2.5 When operating a power tool

outdoors, use an extension cord

suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the

risk of electric shock.

2.6 If operating a power tool in a damp

location is unavoidable, use a residual

current device (RCD) protected supply.

Use of an RCD reduces the risk of

electric shock.

3 Personal safety

3.1 Stay alert, watch what you are doing

and use common sense when

operating a power tool. Do not use a

power tool while you are tired or

under the influence of drugs, alcohol

or medication. A moment of inatten-

tion while operating power tools may

result in serious personal injury.

3.2 Use personal protective equipment.

Always wear eye protection.

Protective equipment such as dust

mask, non-skid safety shoes, hard

hat, or hearing protection used for

appropriate conditions will reduce

personal injuries.

3.3 Prevent unintentional starting.

Ensure the switch is in the off-

position before connecting to power

source and/or battery pack, picking up

or carrying the tool. Carrying power

tools with your finger on the switch or

energising power tools that have the

switch on invites accidents.

3.4 Remove any adjusting key or wrench

before turning the power tool on.

A wrench or a key left attached to a

rotating part of the power tool may

result in personal injury.

3.5 Do not overreach. Keep proper footing

and balance at all times. This enables

better control of the power tool in

unexpected situations.

3.6 Dress properly. Do not wear loose

clothing or jewellery. Keep your hair,

clothing and gloves away from moving

parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

3.7 If devices are provided for the

connection of dust extraction and

collection facilities, ensure these are

connected and properly used.

Use of dust collection can reduce dust-

related hazards.

4 Power tool use and care

4.1 Do not force the power tool. Use the

correct power tool for your applica-

tion. The correct power tool will do the

job better and safer at the rate for

which it was designed.

4.2 Do not use the power tool if the switch

does not turn it on and off. Any power

tool that cannot be controlled with the

switch is dangerous and must be

repaired.

4.3 Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories, or

storing power tools. Such preventive

safety measures reduce the risk of

starting the power tool accidentally.

4.4 Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or

these instructions to operate the

power tool. Power tools are danger-

ous in the hands of untrained users.

4.5 Maintain power tools. Check for mis-

alignment or binding of moving parts,

breakage of parts and any other con-

dition that may affect the power tools

operation. If damaged, have the

power tool repaired before use. Many

accidents are caused by poorly main-

tained power tools.

4.6 Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to

bind and are easier to control.

4.7 Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to be

performed. Use of the power tool for

operations different from those

intended could result in a hazardous

situation.