- ページ 10

リモートスターター Directed Electronics AS-1775のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Directed Electronics AS-1775 14 ページ。 Smart start 5 button automatic /manual transmission remote starter
Directed Electronics AS-1775 にも：ユーザーマニュアル (13 ページ)

ページを印刷する

Example: If your Module is programmed for a runtime of 3 minutes and your vehicle has been

running for 2 minutes already, pressing the

will run for another cycle (in this case, 3 minutes).

Disable/Enable LED flashing

To disable the LED: Press

To Enable the LED: Press

Constant output

• Pressing and holding the

send a constant pulse as long as the

This constant pulse can be configured to activate certain functionalities such as rolling up

the windows – Please refer to your installer to see if your vehicle is compatible with

this option.

• Pressing and holding the

send a constant pulse as long as the

This constant pulse can be configured to activate certain functionalities such as rolling

down the windows – Please refer to your installer to see if your vehicle is compatible

with this option.

Advanced Features: Installationprogrammable

Options

The Remote Car Starter was designed with flexibility and OEM integration in mind. With its

programmable options, this unit can single-handedly control nearly any electrical system in your

vehicle.

Caution

: The programming of your system should be left to a professional. Changing any

one of the settings may affect the operation of your Remote Car Starter. Please note that the

following programmable options may require additional parts and labor.

Ignitioncontrolled Door Locks

This is an added security feature. If your Remote Car Starter was installed with the Ignition-

Controlled Door Locks option, the doors will automatically be locked as soon as the ignition key is

turned to the IGNITION ON (RUN) position while the brakes are pressed. The remote car starter

will also lock any door that was unlocked and opened (then closed) the next time the brake pedal is

pressed. When the key is turned to the OFF position, the doors will automatically be unlocked.

Secure Lock

(Disabled by default.) Before your vehicle can be remote-started, the factory security system must

first be disarmed. The Secure Lock feature may be required on certain vehicle models with factory

security systems that automatically unlock the doors when the security system is disarmed.

To keep your vehicle protected when the factory security system is disarmed for a remote start,

Secure Lock will relock your doors as soon as the vehicle is started. Once the engine is shut down

by remote or after its runtime has expired, Secure Lock will also rearm your factory security system

and relock the doors.

P.10

button will reset the counter to zero and the Engine

and

times.

and

button for more than 3 seconds will lock all doors and will

button for more than 3 seconds will unlock all doors and will

simultaneously until the parking lights flash three

simultaneously until the parking lights flash once.

button is held down (maximum of 15 seconds).

User Guide