- ページ 3
ツール Alemite 7341のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Alemite 7341 16 ページ。 High-capacity
Alemite 7341 にも： サービスマニュアル (12 ページ)
ページを印刷する
Description
Mounting
High-capacity reel models 7340 and 7341
are designed for severe environments, such
as a lubrication truck. They can also mount
to a ceiling
or wall.
1)
NOTE
The hose guide arms can attach to the
base assembly in five (5) different
positions.
These reels mount as a single unit or in
banks of as many as required
(→ fig. 3, page 9 for details).
Operation
Each model reel is spring-powered and sel-
fretracting. When the hose is extended, the
reel can be latched on either of two ratchet
sections per revolution of the sheave. A pull
releases the latch from the ratchet and
allows the hose to retract onto the reel.
Reel models 7340 and 7341
Reel model 7340 contains a high-pressure
swivel assembly. The reel is designed to dis-
pense grease through a
/
in (19 mm) ID
3
8
two-wire braid delivery hose.
A medium-pressure swivel assembly is
included with model 7341. This reel is
designed for
/
in (12.7 mm) ID hose to
1
2
dispense fluid lubricants (such as motor and
gear oil and automatic transmission fluid)
and air.
Delivery hose
Each model reel manages a maximum
length of delivery hose as indicated in
table 1.
1)
The base of the reel must be at a height no
greater than 16 feet (4.9 m) from the floor to
comply with the warranty.
High-capacity reel model 7340 and 7341
Reel model
Inlet (swivel)
7340
/
in NPTF (i)
3
8
7341
/
in NPTF (i)
1
2
Reel model comparison to delivery hose
Reel model
Delivery hose description
7340
/
in ID two-wire braid
3
8
7341
/
in ID single-wire braid
1
2
7341
/
in ID air
1
2
3
Outlet
Reel max. pressure
/
in NPSM (i)
6 000 psi (414 bar)
3
8
/
in NPSM (i)
1 500 psi (103 bar)
1
2
Maximum lentgh of hose in feet
80
100
100
Fig. 1
Table 1