- ページ 13

バッテリーチャージャー CTEK 1018のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CTEK 1018 15 ページ。 Multi us 7002 battery charger

ページを印刷する

TECHNICAL DATA

Model

Voltage AC

Current

Back Current Drain*

Charging Voltage

Ripple**

Charging Current

Battery cable fuse

Ambient Temperature

Cooling

Charge cycle

Type of batteries

Battery Capacity

Dimensions

Insulation

Weight

*) Back Current Drain is what the charger uses to drain the battery if the power cord is

disconnected. The reverse current of the MULTI US 7002 is very low and corresponds to

1Ah per month.

**) The ripple wave describes how many disturbances are exhibited by current and volt-

age. A rippled voltage can cause damage to other equipment connected to the battery.

The MULTI US 7002 supplies voltage and current with very low voltage rippling. This

increases the life of the battery and ensures that equipment connected to it will not be

damaged.

Recommended Minimum AWG Size for AC Extension cords

Length of cord feet (m)

25 (7.6)

50 (15.2)

100 (30.5)

150 (45.6)

1018

100–115VAC, 50–60Hz. Output power is reduced at

lower input voltage.

2.0A rms

< 3mA

Nominal: 12V or 15.7V

Max 150mV rms, max 0.3A

7A max

15A

-4°F to +122°F. Automatic reduction of power at increased

ambient temperature.

Natural convection. Do not cover the charger.

MULTI US 7002 is a multistage fully automatic charger.

All types of lead-acid batteries (Wet, Maintenance Free, AGM

and most GEL).

14–150Ah

x 3

x 1

inches (L x W x H)

Raintight.

1.7 lbs

AWG Size of cord

US • 13