- ページ 7

コントロールユニット Alemite 3685-KのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Alemite 3685-K 10 ページ。 Mechanical-metered control valve

ページを印刷する

Mechanical-Metered Control Valve

Item

Part No.

No.

Body

321191

Tube, Filter

Stud

X171001-14

O-Ring, 3/4 " ID x 15/16 " OD

Spring and Adapter Assembly

Legend:

Part numbers left blank are not available separately

Part number with an X prefix indicates a quantity of ten (10)

Figure 3 Filter Assembly 321203 - Exploded View

Alemite LLC

1-800-548-1191-http://[email protected]

Description

Qty

Assembly

NOTE: Prior to assembly, certain compo-

nents require lubrication. Refer to Table 2

for details.

Metered Control Valve

Metering Mechanism Assembly

1. Install and seat Washer (16) into the head of Housing

(15).

2. Install O-Ring (17) into Gland Nut (18).

3. Screw the Gland Nut into the Housing.

• Tighten the Gland Nut securely.

4. Position Chamber and Piston Assembly (12) gear end

upward.

5. Install Planetary Gear (13) into the Chamber and

Piston Assembly.

6. Position Spindle and Gear Assembly (14) onto the

Chamber and Piston Assembly.

7. With the Spindle and Gear Assembly pointed upward,

install the entire subassembly into the Housing.

• Use care passing the O-Ring.

HINT: Rotate the Spindle and Gear Assem-

bly so the flat of the shaft points between the

posts of the Register Assembly. This aids in

the installation of the Worm Gear.

CAUTION

Make sure the subassembly does not shift during

installation or once installed. Damage to the

Gears can occur.

8. Install O-Ring (11) onto Cap (10).

9. Screw the Cap into the Housing.

• Tighten the Cap to 35 ft. lbs. (47 Nm).

Item No.

O-Ring

Washer

O-Ring

Quad-Ring

O-Ring, 3/4 " ID x 15/16 " OD

Table 2

Components Lubricated in Clean Oil

SER 3685-A

Description

Revision (11-08)