- ページ 7

計測機器 Alemite 3575-BのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Alemite 3575-B 8 ページ。 Oil control handle with mechanical meter

ページを印刷する

SER 3575A

Troubleshooting

Trouble

Meter not accurate

No fluid passing through the meter

The meter is not registering fluid

output

Constant oil leak from the nozzle

Intermittent drip from the nozzle

particles, replace if necessary.

Oil leak from the lever assembly area

Oil leak from between the body handle

and housing gear box

Low flow rate

Oil leaking from the swivel inlet

Specifications

Accuracy

+ - 1% (of Reading)

Flow Range

1-30 l/min (0.26 – 8 US gal/min)

Operating Pressure

0-13.79 Bar / 0-3447 kPa / 0-200 PSI

Maximum Pressure

103.50 BAR / 10350 kPa / 1500 PSI

1Bar/ 100 kPa / 14.4 PSI @ 12 l/min (3.2 US)

Pressure Loss

gal/min) with calibration fluid (6 Centipoise

Viscosity) without extension

Weight

1.16 kg ( 2.55 lbs)

25.8 cm (10 inch) Long x 9.5 cm ( 3.7 inch)

Dimensions:

High, x 11 cm (4.33 inch) Wide (Dimensions

without extension)

Alemite, LLC

Cause

Flow rate not correct

a) Blocked strainer

b) Dirt particles jamming the rotors

c) Damaged plunger seal

a) Damaged register assembly (4)

b) Damaged gear or gears (5,13,15,16, 17)

Damaged plunger seal (29)

Dirt in the nozzle (50)

Damaged o-rings (23, 25)

Damaged o-rings (21)

Blocked strainer (35)

Damaged o-ring or swivel

Swivel Inlet

Outlet

Operating Temperature:

Wetted Parts:

Fluid Compatibility:

Solution

Adjust flow rate to 1-30 l/min (0.26 – 8 US gal/min)

a) Clean or replace strainer

b) Dismantle meter assembly and clean (refer to meter

disassembly)

c) Replace damaged plunger seal

a) Replace register assembly

b) Replace complete gear set, also replace (12) shaft

and (9) O-ring.

Replace plunger seal (check for damage)

Remove the nozzle and blow out any dirt

Replace damaged o-rings

Replace strainer

Replace swivel

1/2" NPT

3/8"

-10 to 55 °C (14 to 131 °F)

Aluminium, Acetal, Steel, Nitrile Rubber

Engine Oil, Diesel Oil, Automatic

Transmission Fluid, Anti-freeze / Anti-Boil

Mixture. (Maximum Viscosity SAE140)

Mechanical Meter Oil Control Handle

Initial Release 10-15