- ページ 4
自動車アクセサリー CTEK D250S DualのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。CTEK D250S Dual 13 ページ。 Dc/dc ic recorder
CTEK D250S Dual にも： ユーザーマニュアル (15 ページ), ユーザーマニュアル (8 ページ), ユーザーマニュアル (12 ページ)
ページを印刷する
SMARTPASS LAMP FUNCTION
LAMP
Power lamp
Alternator battery
2
consumption lamp
Service battery charging
1
lamp
Service battery
4
consumption lamp
Alternator battery
3
charging lamp
Error lamp
SMARTPASS LAMP ERROR INDICATION
2
1
4
3
6 • EN
20015686F D250S Dual + SmartPass, Manual, Print file 001.indd 6
STEADY
FLAShING
Unit ready to use
Too high current through
Engine running
relay
Charging Service battery
Consumers powered by
Too high current through
Service battery
relay
Alternator battery
Too high current through
maintained by Service
relay
battery
Indicates that an error
has occurred. See the
table below.
Steady lamp
Flashing lamp
ExPLANATION
Service battery overheated
Too high current through or temperature at internal relay. Too high
Service battery charge current.
Too high current through or temperature at internal relay. Too many
consumers connected at the same time.
Too high current through or temperature at internal relay. Too high cur-
rent to starter battery.
Too high current through or temperature at internal relay. Too many
consumers connected.
Battery watch activated. Service battery too low
SMARTPASS LAMP INDICATION DURING NORMAL OPERATION
2
1
4
3
RECOMMENDATION
Check condition
and/or installation
Check service battery. Reduce alternator size or add one more D250S
DUAL in parallel. Service battery bank too deeply discharged.
Consider relocation of unit. Reduce power usage.
Starter battery problems, check battery.
Relocate unit or reduce concurrent use of consumers.
Recharge Service battery
ExPLANATION
High current from alternator to service battery. Consu-
mer powered by alternator
Reduced current from alternator to service battery.
Consumer powered by alternator
Consumer powered by alternator. Battery charged by
D250S DUAL charger
Pulse maintenance of starter battery
2011-12-20 11:19:32