ページを印刷する
INSTALLATION OF CANOPY:
INSTALLATION OF FAN BLADES:
9
1) After done up the wiring, attach
the canopy to the hanger bracket
by pushing up and twist to locate
screws in the two key holes.
2) Tighten the two screws firmly.
The two screws will be protruded
with some allowance to receive
fig 8
the canopy cover. (fig 8)
3) Move the canopy cover towards
the canopy and attached to the
screws and twist anticlockwise
until its installed tightly. (fig 9)
fig 9
1) Remove the blade screws from
the motor. Attach the blades to
the motor and tighten the screws
firmly. (fig 10)
fig 10