ページを印刷する
SAFETY PRECAUTION:
IMPORTANT: PLEASE READ BEFORE INSTALLATION
1.
The installa�on work must be carried out by a qualified wiring installer.
2.
Turn off the Electrical Main Switch at the circuit breaker fuse box.
3.
Using power supply 220 – 240V ~ / 50Hz.
4.
When moun�ng the fan, to ensure the safety cable is loop across the ceiling
moun�ng 'J' hook.
5.
The ceiling fan must be mounted so that the blades are more than 2.3
meters above the floor.
6.
Do not operate the reverse switch when the fan is s�ll in mo�on mode.
Wait �ll its stop completely before switching to reverse mode.
7.
Do not insert any objects in the path of the blades.
8.
When all electrical connec�ons are done, store all wires neatly.
9.
Make sure all screws and connec�ons are �ghtly screwed and secured.
10.
The supply wires live and neutral must be connected to a double pole
switch having a contact of at least 3mm in all poles.
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND
THE BLADES BRACKETS DURING ASSEMBLY OR AFTER
INSTALLATION. DO NOT INSERT ANY OBJECTS IN THE PATH OF
TO REDUCE THE RISK OF SHOCK, THIS FAN MUST BE
INSTALLED WITH AN ISOLATION WALL CONTROL / SWITCH.
WARNING
THE BLADES.
2