ページを印刷する
INSTALLATION OF CANOPY:
1)
A�ach the canopy to the hanger bracket by pushing up the twist to locate
screws in the two keyholes. Check and make sure the canopy does not
press on any wires as the wires might breakdown and caused
short-circuited.
2)
Tighten the two screws firmly. The two screws will be protruded with some
allowance to receive the canopy cover (fig 8 ).
3)
Move the canopy cover towards the canopy and a�ach to the screws and
twist an�-clockwise un�l its installed �ghtly (fig 9).
INSTALLATION OF FAN BLADES:
fig 8
1)
Remove the blade screws from the
motor. A�ached the blades to the
motor and �ghten the screws
firmly (fig 10).
fig 10
fig 9
8