INSTALLATION OF LIGHTKIT:
9
1) Remove one screw from the
motor round piece, unscrew the
other two screws out by 3-4mm.
(fig 9)
2) Attach the lightkit to the fan, fix
the first screw back to the hole
and tighten all the three screws
firmly. (fig 9)
fig 9
3) Direct plug in the wire to the
lightkit
Carefully attach the acrylic cover
to the lightkit and twist clockwise
until its secured tightly. (fig 10)
4) The finished product as fig 11.
fig 10
docking
(connector).
fig 12