- ページ 4

ソウ Clarke CMSF110のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke CMSF110 20 ページ。 Multi purpose circular saw

GENERAL SAFETY PRECAUTIONS

Important Note: Although the operation manual contains extensive instruction

on safe working with power tools, every power tool involves a certain residual

risk which cannot be completely excluded. Power tools must therefore

always be operated with caution.

WORK AREA SAFETY

1. Keep work area clean and well lit. Cluttered or dark areas invite

accidents.

2. Do not operate power tools in explosive atmospheres, such as In the

presence of flammable liquids, gases or dust. Power tools create sparks

which may Ignite the dust or fumes.

3. Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

ELECTRICAL SAFETY

1. Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adaptor plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

4. Do not abuse the cable. Never use the cable for pulling or unplugging the

power tool. Keep cable away from heat, oil, sharp edges or moving parts.

Damaged or entangled cables increase the risk of electric shock.

5. If operating a power tool in a damp location is unavoidable, use a

residual current device (RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

PERSONAL SAFETY

1. Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired or

under the influence of drugs, alcohol or medication. A moment of

inattention may result in serious personal injury.

2. Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask or non-skid safety shoes used in

appropriate conditions will reduce personal injuries.

3. Prevent unintentional starting. Ensure the switch is in the OFF position

before connecting to power source and/or battery pack, picking up or

carrying the tool.