- ページ 6

ソウ Clarke woodworker CMS10 6501305のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke woodworker CMS10 6501305 20 ページ。 10” compound mitre saw

ADDITIONAL SAFETY INSTRUCTIONS

Wear safety goggles as protection against flying wood chips and saw dust. In

many cases, a full face shield is even better protection. A dust mask is also

recommended to keep saw dust out of your lungs.

Use a solid wood workbench which will not move under load.

This saw is for indoor, DIY or medium trade use only.

Clear the work table of all objects except the workpiece (tools, scraps, rulers

etc.) before switching on the saw.

Keep your fingers well away from the blade.

Switch off the saw, and make sure the blade has come to a complete stop

before clearing sawdust or off-cuts from the table.

Make sure there are no nails or foreign objects in the part of the workpiece to

be sawn.

Set up the machine and make all adjustments with the power OFF, and

disconnected from the supply.

DO NOT operate the machine with the guards removed. They must all be in

place and securely fastened when performing any operation.

10. Use ONLY approved replacement saw blades. Contact your local CLARKE

dealer for advice. The use of inferior blades may increase the risk of injury.

11. DO NOT saw any material that does not have a flat surface on which to bear.

12. This machine is designed for cutting wood. DO NOT use for cutting metal,

plastics or masonry.

13. Do Not force the blade, lower it gently into the work.

14. Ensure you have complete control of the Cutting Head at all times. When a cut

is completed, return it to its uppermost position gently. DO NOT allow it to snap

back heavily under spring pressure.

15. Always clamp the work to the table...DO NOT perform freehand operations.

16. Ensure that the portion of the workpiece being cut bears firmly against the

back fence.

17. Provide adequate support for long workpieces.

18. Never use solvents for cleaning plastic parts as this could cause damage to

the material. A soft damp cloth only is required.

19. The saw blade must have a rated capacity greater than the maximum speed

of the machine - see Specifications

for MITRE SAWS