- ページ 8

ソウ Clarke ZX-R Pro SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke ZX-R Pro Series 17 ページ。 20v cordless multi function tool
Clarke ZX-R Pro Series にも：取扱説明書 (8 ページ), 取扱説明書 (9 ページ), 取扱説明書 (17 ページ), 取扱説明書 (13 ページ), 取扱説明書 (17 ページ)

ページを印刷する

ADJUSTMENTS

ADJUSTING THE PENDULUM

The pendulum moves the blade away from the cut on the down (non-cutting)

stroke and forward into the workpiece on the upward (cutting) stroke. The

pendulum can be particularly useful when cutting thicker, denser materials.

1. Adjust the pendulum control to

suit the material being cut using

the following suggested settings

as a starting point if required. Do

not use the pendulum action for

cutting ceramics or metals.

Material

Ceramics

Metal

Plywood, Plastics

Timber, Fiberglass & Chipboard

ADJUSTING THE SOLE PLATE

The sole-plate is adjustable so that bevels of up to 45° may be cut. Loosen the

two socket head screws under the sole-plate before adjusting it to the desired

angle and re-tightening the screws.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Pendulum Setting

1-2

1-3