ページを印刷する
CLEANING & MAINTENANCE
Always allow the heater to cool down for at least 15 minutes and disconnect it
from the mains supply before performing any maintenance tasks.
PERIODICALLY
1. Inspect the power cable for damage. Undue heat will cause the cable to
stiffen and crack. If this is found, have the cable replaced. Check your
cable routing and ensure it is well away from the heat source.
2. Should the heater become dirty, disconnect it from the power supply,
remove the front guard and wipe the reflector and elements with a clean
damp cloth. DO NOT use abrasive cleaners. Take care that no moisture
enters the heater.
3. Refer to your CLARKE dealer if internal maintenance is required.
4. When storing the heater, allow it to cool down before storing it in a dry, well
ventilated place.
ELEMENT REPLACEMENT
Ceramic heating elements are long lasting and should not need replacing
under normal circumstances. Should this become necessary take the heater
to your CLARKE dealer.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
11